SpanLoc 200
SpanLoc 200 is an asymmetrical, mechanically seamed standing seam roof system that features an aesthetically pleasing appearance for low slope roof applications, yet provides excellent resistance to wind uplift. Panels are designed for application over open purlins and blanket insulation or solid substrates like plywood or metal decking. This panel is a great choice for new or retrofit applications.
Substrates and Finish
- 22, 24 & 26 Ga AZ-55 Acrylic Galvalume
- 24 & 26 Ga SMP Color Finish
- 22 & 24 Ga 70% PVDF / Kynar500
- .032" or .040 Aluminum 70% PVDF / Kynar500
- 24 Ga Paint Grip / Bonderized
Features
- 2" nominal seam height
- 14 1/4" to 18 1/4" panel sizes are available, depending on the material
- Panel finish: striated (standard), smooth, small and large rib, small and large V, clip relief
- Fixed or expansion clips allowing for different thickness of the batt insulation are available
- Minimum 0.5/12 slope over a solid deck or open frame
- Optional continuous sealant in the lap is available
- Eligible for Water Tightness warranty
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Brochure / Information
Certificates / Testing
