SpanLoc 150
SpanLoc 150 is mechanically seamed, architectural, standing seam panel, which combines a traditional thin rib profile appearance, superior weather tight capability, and exceptional resistance to wind uplift. SpanLoc 150 is designed to be applied over solid substrate or open frame as a roof, mansard, or fascia. Optional expansion clip allows for thermal expansion and contraction of the panel. SpanLoc 150 panel can be curved to a convex radius as small as 10' for curved roof application.
Substrates and Finish
- 22, 24, 26 Ga AZ-55 Acrylic Galvalume
- 24 & 26 Ga SMP Color Finish
- 22 & 24 Ga PVDF / Kynar500
- 24 Ga Paint Grip / Bonderized
- 16 & 20 oz Copper
- .032 & .040 Aluminum 70% PVDF / Kynar500
Features
- 1 1/2" nominal height
- 16" to 20" panel sizes are available, depending on the material
- Fixed or expansion clips are available
- Panel finish: striated (standard), smooth, small and large rib, small and large V, clip relief
- Minimum 2/12 slope over a solid deck
- Optional continuous sealant in the lap is available
- Convex radius panels are available
- Eligible for Water Tightness warranty
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Certificates / Testing
Brochure / Information
