SpanLoc 100
SpanLoc 100 is a mechanically seamed, architectural standing seam panel. Which combines a traditional thin rib profile appearance, superior weather tight capability, and exceptional resistance to wind uplift. SpanLoc 100 is deigned to be applied over a solid substrate such as a roof, mansard, or fascia. Available expansion clip allows for thermal expansion and contraction of the panel if needed. Tapered panels are available up to 29' lengths. SpanLoc 100 panel can be curved to a convex radius as small as 10' for curved roof applications.
Substrates and Finish
- 22 & 24 Ga 70% PVDF / Kynar500
- 24 & 26 Ga SMP Color Finish
- .032 or .040 Aluminum 70% PVDF / Kynar500
- 22, 24 & 26 Ga AZ-55 Acrylic Galvalume
- 24 Ga Paint Grip / Bonderized
- 16 & 20 oz Copper
Features
- 1" nominal seam height
- 13" to 21" panel sizes are available, depending on the material
- Fixed or expansion clips are available
- Panel finishes: striated (standard), smooth, small and large rib, small and large V, clip relief
- Minimum 3/12 slope over a solid deck
- Convex radius panels are available
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Brochure / Information
Certificates / Testing
