ShurLoc 550
ShurLoc 550 is an architectural standing seam roof system that is an integral continuous seam lock that snaps together with no mechanical seaming required. Aesthetically appealing yet strong, providing superior resistance to wind uplift. Panels are designed for applications over solid substrates like plywood or metal decking. One-piece clips allow for unlimited thermal movement.
Substrates and Finish
- 22 & 24 Ga 70% PVDF / Kynar500
- 24 & 26 Ga SMP Color Finish
- .032 & .040 Aluminum 70% PVDF / Kynar500
- 22, 24, 26 Ga AZ-55 Acrylic Galvalume
- 24 Ga Paint Grip / Bonderized
Features
- 1 1/2" nominal height
- 15" to 19" panel sizes are available, depending on the material
- Panel finishes: striated (standard), smooth, small and large rib, small and large V, clip relief
- Minimum 2/12 slope over a solid deck is required
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Brochure / Information
