ShurLoc 175
ShurLoc 175 is an exceptional architectural / structural standing seam roof system that may be utilized in a variety of roof, mansard, and fascia applications. The design allows for application over a variety of solid substrates as well as over open framing. ShurLoc 175 is a snap together design that does not require additional seaming with a mechanical seaming tool.
Substrates and Finish
- 22 & 24 Ga 70% PVDF / Kynar500
- 24 & 26 Ga SMP Color Finish
- .032 & .040 Aluminum 70% PVDF / Kynar500
- 22, 24, 26 Ga AZ-55 Acrylic Galvalume
- 24 Ga Paint Grip / Bonderized
Features
- 1 3/4" nominal seam height
- 14" to 18" panel sizes are available, depending on the material
- Panel finish: striated (standard), smooth, small and large rib, small and large V, clip relief
- Snap together seam
- Minimum 2/12 slope over a solid deck or open frame
- Eligible for Water Tightness warranty
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Brochure / Information
Certificates / Testing
