ShurLoc 150
ShurLoc 150 is an architectural standing seam roof system that snaps together with no mechanical seaming required. The ultra thin rib is aesthetically appealing yet strong,providing excellent resistance to wind uplift. Panels are designed for application solid substrates like plywood or metal decking. One-piece clips allow for unlimited thermal movement.
Substrates and Finish
- 22 & 24 Ga 70% PVDF / Kynar500
- 24 & 26 Ga SMP Color Finish
- .032 Aluminum 70% PVDF / Kynar500
- 22, 24, 26 Ga AZ-55 Acrylic Galvalume
- 24 Ga Paint Grip / Bonderized
Features
- 1 1/2" nominal seam height
- 11 3/4" to 19 3/4" panel sizes are available, depending on the material
- Panel finish: striated (standard), smooth, small and large rib, small and large V, clip relief
- Snap together seam
- Minimum 3/12 slope over a solid deck is required
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required, it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
3. Remove all strippable film as soon as possible to prevent bonding to the panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference, and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance are crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Brochures / Information
Certificates / Testing
