U / PBU Panel
GENERAL DESCRIPTION
- Rib height: 3/4”
- Coverage widths: 36”
- Optional purlin bearing rib (PBU).
- Minimum slope: 1:12
- Panel attachment: Exposed Fastener.
- Panel Substrate: Galvalume or Galvanized.
- Gauges: 29, 26, 24 or 22
- Coatings:
- Acrylic Coated Galvalume
- Silicone Modified Polyester Paint System
- Kynar 500 Paint System
- Other substrates and finishes available, please inquire.- Use a properly aligned and uniform substructure to avoid panel distortion. Typical substructures include plywood and OSB. All substructure must be properly engineered to meet specified design loads. For illustration purposes, details are shown over plywood decking.
- Any mechanical attachment device that does not lay flat on the deck will telegraph through the panels.
- Panels can be used on roofs with transitions or slope changes.
- All panels are subject to surface distortion due to improperly applied fasteners. Overdriven fasteners will cause stress and induce oil canning across the face of the panel at or near the point of attachment. Standard CTMRS fasteners are recommended for attachment to metal and wood for all architectural panels. Use maximum caution when fastening to a wood structure.
- All panels require sealant at eave or valley conditions.
Brochure / Information
Certificates / Testing
